Rode NTG 1 shotgun

Достапно со нарачка
Додајте го производот во кошничка и комплетирајте ја нарачката. Ќе ве контактираме во најбрз можен рок.

A fundamental shotgun mic, the Rode NTG1 offers the professionally accurate and pure sound recording required by industry standards.

SKU: 58046060 Категорија


The RODE NTG-1 is a lightweight condenser shotgun microphone, specifically designed for professional applications within the film, video, television, voiceover and ENG industries.

The NTG-1 provides an electronically balanced output stage and operates on 48 V to the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it ideal for mounting directly to video cameras (with optional accessories) or a Boom pole.

The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively suppresses wind noise when recording outdoors in moderate conditions. Optional accessories are available for more demanding applications.


– Broadcast sound quality
– Low noise circuitry
– Condenser transducer
– Rugged metal construction
– Low weight: 105 grams approx. (3 oz.)
– Low handling noise
– Supplied with stand mount, zip pouch and windshield
– Designed & manufactured in Australia
– Full 2 year guarantee


Specifikacija - Operation power: The NTG-1 is designed to operate from standard P48 phantom power. The NTG-1 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.
- Operation output impedance: The NTG-1 will operate satisfactorily into a load impedance as low as 1 kilohm. If a load below this is used, the output signal level will be reduced. The NTG-1s output is balanced between pin 2 (hot), pin 3 (cold) and pin 1 is ground.
- Acoustic principle: Line plus Gradient.
- Directional pattern: Super-Cardioid.
- Frequency range: 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
- Output impedance: 50 ohms
- Signal noise ratio din iec 651: 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
- Equvalent noise: 18 dB SPL (per IEC651, IEC268-15)
- Maximum spl: 139 dB (@ 1% THD into 1 k ohms)
- Sensitivity: -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
- Dynamic range din iec 651: 121 dB (per IEC651, IEC268-15)
- Power supply voltage: P48 Phantom, 44 V to 52 V
- Current consumption: 3.5 mA
- Output connection: 3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
- Weight with battery: 105 g approx. (3.37 oz.)
- Dimensions width: 217mm
- Dimensions depth: 22mm
- Dimensions height: 22mm
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 0.96 lbs
Shipping Dimensions: 11 x 5 x 3 in




Scroll to Top